It’s something I didn’t do in many many years, that’s why I create this post. Just for me to find all the information for the next time when I will have to configure MGCP.
MGCP Verbs :
| Command | Message Name | Sent By | Description |
|---|---|---|---|
| AUEP | AuditEndpoint | CallManager | Get the status of a given endpoint. |
| AUCX | AuditConnection | CallManager | Retrieves all the parameters associated with a connection. |
| CRCX | CreateConnection | CallManager | Creates a connection between two endpoints. |
| DLCX | DeleteConnection | Both | From CallManager:Terminates a current connection. From Gateway:Indicates that a connection can no longer be sustained. |
| MDCX | ModifyConnection | CallManager | Changes the parameters (Update info) associated with an established connection. |
| RQNT | NotificationRequest | CallManager | Instructs the gateway to watch for special events such as hooks or DTMF tones. It is also used to instruct the gateway to provide a signal to the endpoint (for example, dial tone and busy tone). |
| NTFY | Notify | Gateway | Informs the Cisco CallManager when requested events occur. |
| RSIP | RestartInProgress | Gateway | Informs the Cisco CallManager that an endpoint or group of endpoints are taken out or placed back into service. |
| EPCF | Endpoint configuration | Callmanager | Alert configuration of the endpoint(things like gain level, codec, etc |